משרד: 02-9605631    להזמנות גדולות: 052-8990321    פקס: 153-2-9605631
כללי

In addition to honda Pioneer accessories that are homologated for the road like mirrors, we also sell items such as turn signals and horn kits at Everything Honda Offroad. Many riders love honda Pioneer plug-and-play turn signals, which use factory brake lights as turn signals. But we also offer users Honda Pioneer turn signal kits with indicator led included. And while pneumatic horns may be suitable for some, the Honda Pioneer horns available at Everything Honda Offroad are designed to excel in harsh conditions and pass the test of any local UTV inspection. Use our Honda Pioneer kits to legalize your motorcycle, or use them to communicate, increase safety and express your intentions on the track/trail. And even if you never intend to spin a single wheel on asphalt, you may still need road approval accessories, as many off-road parks and OHV areas need them! Plug and Play Easy InstallationFits Honda Pioneer 700/10002 and 4-seater modelsPlug into oem brake light wiring harness, with factory brake lightsComes come with 3/4″ front flashing lights – 3 LEDs LED-illuminated rotary switches engraved on the laserNo hazard switchPower switchinter for license plate light optionalEngine and push buttonMade in the United States! The above-mentioned Honda Pioneer road accessory is the most common in the United States. However, there are other road-approved accessories for the Honda Pioneer that you may need to install as well. Honda Pioneer road tires approved by the U.S. Department of Transportation may be mandatory, as may DOT-certified Honda Pioneer STREET windshields made with a thick metal frame and laminated safety glass.

Whatever the law requires, it can be found at Everything Honda Offroad. So fasten your seatbelt, put on a helmet if necessary and burn some rubber if the 5-0 doesn`t look – just be sure to show a slow vehicle triangle, get proper insurance, and follow all traffic rules like you would with a standard car! Our Honda Pioneer Plug and Play turn signal kit also includes a “Hazard/Horn” toggle switch. By pressing the upper side “Hazard” of the actuator, the hazard lights are turned on, which will bring the switch back to the middle position, they will be deactivated. In addition, pressing the bottom part of the custom toggle switch activates the supplied FIAMM horn. A front strap is included, which includes two Maxxima 3/4″ amber LED lights that can be mounted in any corner by piercing a set. Additional lights and separators are sold separately for those who wish to extend their configuration. Once you`ve taken care of the mirrors, turn signals, and horns, the next thing you`ll need to make your Honda Pioneer legal on the road is a license plate frame. As long as your license plate is displayed correctly and clearly visible, you should be well on the road in most areas. But if you need to turn on your plate, don`t worry, as we sell illuminated Honda Pioneer license plate holders that are integrated into your machine`s rear brake light wires with simple braids and wiring harness plugs! From Honda Pioneer road tires and DOT windshields to complete Honda Pioneer homologation kits including mirrors, turn signals, lights and horns, you`ll find everything you need to make your Honda Pioneer homologated on the road at Everything Honda Offroad.

Depending on where you live and drive, you may only need a turn signal replacement and a rearview mirror to approve your Honda Pioneer for road traffic. However, in some places, you are required by law to install an illuminated license plate holder, a set of side mirrors, and a variety of other Honda PIoneer street-approved accessories. This kit is designed for the following vehicles: Honda Pioneer 1000/1000-5 All years (2016-2021) Installation instructions included If you prefer to stay on the right side of the law and don`t want to be harassed by the police when shopping in town on your UTV, it is a must to make your Honda Pioneer legal on the road. And even if you only drive on paved roads, if you drive from one dirt road to another, MNR or your local patrol officers can still hit you with a ticket if your vehicle is not properly registered, glued and registered. While the rules vary from state to state and even county to county, there are several Honda Pioneer homologation accessories required, no matter where you drive. So if you have local regulations that require a licensed UTV to legally drive single-lane roads, or if you`re looking for the right legal accessory for the road so you can drive more than 10 miles on a two-lane road, that`s all Honda Offroad here with all the Honda Pioneer parts homologated for the road, Honda Pioneer road approval accessories and Honda Pioneer road-legal kits, to make your rigging roadworthy and able to pass the strictest inspections! Almost all municipalities require homeowners to install Honda Pioneer mirrors to make their UTVs legal on the road. In some places, a single rear-view mirror is sufficient. In other places, however, drivers must have both a rear-view mirror and side mirrors to comply with the rules. Either way, where you live, work and drive, we have both basic Honda Pioneer mirrors that make your platform legal on the road and replacement Honda Pioneer mirrors that are not only legal for the road, but also off-road. Our detachable Honda Pioneer side mirrors, for example, are perfect for those who travel narrow paths that represent a high probability of mirror impacts.

Whether you get a little too close to trees, hillsides, or traffic signs/guideposts, Honda Pioneer Breakaway mirrors are folded backwards on impact instead of tearing them off directly. Similarly, the mirrors we offer for the Honda Pioneer are also optimized for off-road use. We have wide-angle mirrors to give you unparalleled lines of sight, as well as illuminated mirrors that serve as both mirrors and dome lights. Our Honda Pioneer Auto-Cancel Turn Signal Kit also includes a “Hazard/Horn” toggle switch. Pressing the top “Hazard” side of the actuator turns on the hazard lights and pressing them again will turn them off. In addition, pressing the bottom part of the custom toggle switch activates the supplied FIAMM horn. Each ATS has a vehicle-specific wiring harness that connects in-line to the factory rear belt. The brake light signal passes through the ATS. As a result, the opposite brake light is still working normally while the activated turn signal brake light flashes. XTC Power Products is a leader in UTV cabling.

Installing turn signals on a UTV is easier than ever with our plug and play turn signal system for the Honda Pioneer. The TSS (Turn Signal System) consists of a relay control box and horn mounted under the hood and turn signal, as well as custom hazard/horn switches mounted in the dashboard. An included vehicle-specific rear belt integrates with the Honda Pioneer OEM taillights and turns them into turn signals. Unlike our competitors, all ATS kits include an auxiliary power output for a license plate lamp or whip light. In addition, the auxiliary power is good to power our 6″ LED Bed license plate frame. Above all, each system has an electrical connection specific to the vehicle. Undoubtedly, it is easy to install, without cutting the wires and without crimping. Due to its size, the ATS is also versatile. Everything you need for integration into your vehicles, OEM brake light harness included.

Tags:
X